この商品は現在お取り扱いできません。
お届け先を選択

プラネットバイク(PLANET BIKE) P7004 FREDDY FENDER フェンダーSET P7004

3.3 5つ星のうち3.3 89個の評価

この商品は現在お取り扱いできません。 在庫状況について
  • 前後フルサイズフェンダーセット ダボ止め
  • カラー:ブラック
  • ハイブリット車/ロード用
  • フレームに取り付け用のネジ穴がないと取り付け不可
  • カバー幅:45mm
もっと見る
アマゾンに出品しませんか?:
アマゾンに買い物に訪れる何億人ものお客様にご自身のブランドの商品をお届けいただけます。
FBAなら配送からカスタマーサービスまでアマゾンにおまかせ。
今なら新規出品者様向け特典で最大787.5万円還元
Amazonで販売を開始する

【まとめ買いフェア開催中】よりどり2点以上で5%OFF
アウトドア用品、ファッション、食品・飲料、母の日ギフト、父の日ギフト関連商品など、10万点を超える対象アイテムからよりどり2点以上で5%OFF。 セール会場はこちら

商品の情報

詳細情報

登録情報

ご意見ご要望

プラネットバイク(PLANET BIKE) P7004 FREDDY FENDER フェンダーSET P7004

プラネットバイク(PLANET BIKE) P7004 FREDDY FENDER フェンダーSET P7004


さらに安い価格を見つけられた場合は、当サイトまでお知らせください。お客様からの情報を参考にして、さらにリーズナブルな価格でご提供できるよう努力します。

さらに安い価格はどこでご覧になりましたか?

Fields with an asterisk * are required

/
/
/
/
フィードバックを提供するにはサインインしてください。

商品の説明

プラネットバイクは1996年アメリカウィスコンシン州マディソンで設立されたサイクルアクセサリー専門のメーカーです。

特定の情報をお探しですか?

カスタマーレビュー

星5つ中3.3つ
5つのうち3.3つ
89グローバルレーティング

この商品をレビュー

他のお客様にも意見を伝えましょう

上位レビュー、対象国: 日本

2012年9月17日に日本でレビュー済み
Amazonで購入
十年モノの古いジャイアント(700C×38C)のドロ除けが割てしまい、交換用に購入しました。元々付いていたドロ除けがの幅と同じサイズを選んだので、何も加工せずにピッタリ付きました。質感も良く、色がシルバーから黒くなったので、取付けてみると雰囲気もぐっとシブくなり、大変に気に入っています。
2011年1月11日に日本でレビュー済み
Amazonで購入
車通勤から自転車通勤に変更に伴い、コラテックの700Cのクロスバイクに取り付けました。
第一印象はママチャリのフェンダーのプラスチックバージョンだと思いました。
社外品ゆえにポン付けは出来ず、フロント側がブレーキに当たってしまい、干渉部分を切断しようか迷いましたが、
ホームセンターで購入した鉄の板(縦3センチ、横1センチ、厚み2ミリ)をフェンダーのL字ステーに取り付け、2センチほど下げる形にして取り付けました。
リア側は問題なしで取り付けました。
棒状のステーを、フロント、リア側ともに2センチほど切断して長さを調整しました。
取り付け後は非常にしっかりしていて、雨、泥を完全にガードしてくれます。
問題点は棒状のステーを加工するのに鉄ノコやグラインダーなどの工具が必要な事と説明書が英文なので自転車の知識がないと取り付けが難しい所です。
フェンダーを取り付ける事で、自転車の見栄えが多少悪くなりますが、私はこの商品を大変気に入っております。
2012年11月13日に日本でレビュー済み
Amazonで購入
Raychell+700c(グリ−ンR+722EA FUJIKI)に着けてみたが、あまり合わないらしい。特に前部フェンダーは、ホームセンターのボルトも合わない(ピッチが違うらしい)しかたないが、ゆるいままです。他は、市販品のボルトで大丈夫です。ステーは、3cmくらい切らなければなりません。他は、やもうえず、ビニールタイで、とめました。一応ステーさえ切れれば良いです。どうしてもの場合はステーをまげてもいいです。
2011年6月26日に日本でレビュー済み
Amazonで購入
メリダ CW50 フレームサイズ460mm (700C 32)には問題なくセットできました。見た目も違和感はありません。
ただし、備え付けのネジでは、前後輪ともフェンダー上部とボディを接続することはできませんので、DIY店とうで、ネジを購入する必要があります。
2人のお客様がこれが役に立ったと考えています
レポート
2012年5月3日に日本でレビュー済み
雨の日リアキャリアーに積んだ荷物が汚れてしまうのが気になり購入しました。
タイヤから打ち上げられてくる水が全力で荷物にかかっていたのが解消され、とても気に入っています。

でも、取り付けは少し苦労しました。
フロントフェンダーのステーがつま先と干渉してしまったため、安めのパイプカッターを購入し短く切断しました。
他に方法があったかもしれませんが、ステーは太めなので(その分、耐性は十分)ニッパーなどでは切れませんでした。金鋸でもいけると思います。
別途、ダボあなに取り付けるためにボルトとナットが2セット必要です。

一度取り付けてしまえばそうそう取り外さないので、手間は最初だけでした。
性能にはとても満足していますが、ただ黒は汚れが目立ちます…
2010年12月22日に日本でレビュー済み
Amazonで購入
純正アルミ泥除けがボロボロになった(ビアンキのママチャリ)ので、社外品を検索した結果購入。
Fはなかなかうまくフィッティングせず、上部金属板取り付けステー部分が干渉し、(いろいろ曲げては見ましたが)結局樹脂フェンダー上部を大幅に切削穴あけ(長方形)しました。
樹脂製のお陰と感謝?するしかないです。
よくもわるくも社外品 他に安くてよい商品も見当たらず、こんなもんでしょうね。
リアのチェーンステー上部の取付もプラハンガーでして、駐輪場なんかで変な力がかかると外れます。前後金属の針金状ステーは問題なし。
2009年10月7日に日本でレビュー済み
Amazonで購入
700Cのクロスバイクに取り付けました。
本体はポリカーボですが、プレス成型ではなくインジェクション成型です。
肉厚でしっかりしていますが見た目よりは若干重めです。
ステーの末端金具は4個とも同じなので左右で上下の向きがてれこになってしまいます。
取り付けは全部のステーを30ミリ程度カットする必要があるのと、チェーンステーの補強バー幅が狭い場合は後フェンダーの前端にカシメ止めされている金具を外してボルトを用意して止める必要があります。
どちらもサンダー等の回転切削刃がないと厳しいです、ペンチニッパーでは切れません。
取り付け後は大変しっかりとしています。
機能には満足ですが、加工が必要なこと、ステー末端金具に配慮が足りないことで星3としました。
8人のお客様がこれが役に立ったと考えています
レポート
2011年11月22日に日本でレビュー済み
Amazonで購入
後輪側の取り付けはスムーズにいったのですが、やはりフロント部がフォークにあたり
タイヤが38Cと太いためタイヤとフェンダーの間に隙間を取れませんでした。
接触部分より前を切断することも考えましたがプラスチックなら熱で変形出来るかもと
ヤキゴテを当ててみました。
表面は狙いどうり変形出来たのですが裏側がモチのように膨れてしまいました。
見えないしタイヤにも当たらないのでそのままですがもう1回やらさせてくれたら
もっと綺麗に仕上げられるのになぁの気分です。

商品はしっかり固定出来て良いものだと思いますがフロント部に最初からへこみや絞りがあれば
より汎用性、作業性が上がると思います。

他の国からのトップレビュー

すべてのレビューを日本語に翻訳
BioFlamingo
5つ星のうち5.0 Great fenders
2010年1月20日にアメリカ合衆国でレビュー済み
Amazonで購入
I bought a set of these for my commuter since they were cheap, expecting to get something that rattled and jiggled like no other before disintegrating. However, once I received them I was gladly proven wrong.

Installation: Very easy and quick to install. I put them on a touring/commuting style frame with 700x35 tires. They were very easy to get aligned and attached.

Appearance: These fenders look sharp and of quality. I've received many compliments on how good my bike looks. I only wish they sold a silver set at this price.

Performance: It's been raining/snowing here for several weeks and these fenders have saved my clothing time and time again. The snow/ice will cake up inside of them, but a quick shake and it falls out. They haven't come loose at all, and several blocks of my commute are on brick roads which are very bumpy. Still no rattling. They also fit under my rear rack with plenty of clearance.

Durability: While getting this bike down from it's rack I smacked the rear fender against the wall quite hard. The fender bounced right back to shape and was perfectly fine. I imagine that if you really hit something hard the mounting hardware might bend, but the plastic more than likely won't crack.

Overall, you can't beat these fenders, especially for the price. I purchased a second pair for my trail bike, and will most likely purchase more for other bikes. The only drawback of these fenders is that they only come in 1 color, but I can live with that considering how good these are.
4人のお客様がこれが役に立ったと考えています
レポート
Nicholas Luers
5つ星のうち4.0 Very Good Fenders!
2009年10月17日にアメリカ合衆国でレビュー済み
Amazonで購入
These fenders are very good for my bike. They are the right length and the width is a little wider than my tires. They were easy to set up on the bike, the instructions while not very organized, were easy to follow. This has all the hardware to install and some tips if your bike doesn't have all the necessary mounting areas.

I will see how these stand the test of time. The only problem I have had so far is the rear finder's adjustment bolt is stripped, I tighten the other one but this one is loose. This makes the back fender somewhat out of alignment with the wheel, but it isn't a major issue since I have a rack on the back.

Note, this ships in a HUGE box, much much larger than these fenders. The box is about five feet long, by one foot wide and one foot tall, very large!

UPDATE - Jan 20th - It's been 3 months since I have purchased these and they are still great! I have to tighten some of the adjustments every once in a while but that should be expected, especially with them being in the -5 degrees F, and then sit in the sun getting them up to about 50 degrees F. They are great in winter and I never have a problem getting wet on my road bike. If only I could put fenders like this on my Mountain bike.
1人のお客様がこれが役に立ったと考えています
レポート
Prairie Larry
5つ星のうち3.0 Attractive and low priced, but not a simple installation.
2017年3月25日にアメリカ合衆国でレビュー済み
Amazonで購入
The fenders are attractive and durable. They certainly look like they came on the bicycle as factory add-ons.

Attaching them was not as simple as I hoped. I spent more than an hour due to different holes and wrong screws. I don't expect this is a problem specific to this manufacturer, but my bicycle was a Gary Fisher. This bike is hardly out of the ordinary, yet the mounting holes were not standardized and I had to find a couple different screws to prevent interference with moving parts.

How do they function? Unfortunately, in the rain, I got a lot of splashing onto my shoes from the front tire. The front fender just isn't long enough for my bicycle. I don't know if any after-market fenders would be any better. The rear fender worked fine to prevent the stripe of mud on my back. The fenders are not too useful in winter and there was a bit of snow build up between them and the tires.

The biggest problem: if you use knobby tires at the maximum width, the knobs can sometimes catch on the fender edge causing a freakish stop. It can be dangerous on ice. It shouldn't be a problem if you choose smooth tires.

Overall, the worth the low price, but a bit difficult to install.
カスタマー画像
Prairie Larry
5つ星のうち3.0 Attractive and low priced, but not a simple installation.
2017年3月25日にアメリカ合衆国でレビュー済み
The fenders are attractive and durable. They certainly look like they came on the bicycle as factory add-ons.

Attaching them was not as simple as I hoped. I spent more than an hour due to different holes and wrong screws. I don't expect this is a problem specific to this manufacturer, but my bicycle was a Gary Fisher. This bike is hardly out of the ordinary, yet the mounting holes were not standardized and I had to find a couple different screws to prevent interference with moving parts.

How do they function? Unfortunately, in the rain, I got a lot of splashing onto my shoes from the front tire. The front fender just isn't long enough for my bicycle. I don't know if any after-market fenders would be any better. The rear fender worked fine to prevent the stripe of mud on my back. The fenders are not too useful in winter and there was a bit of snow build up between them and the tires.

The biggest problem: if you use knobby tires at the maximum width, the knobs can sometimes catch on the fender edge causing a freakish stop. It can be dangerous on ice. It shouldn't be a problem if you choose smooth tires.

Overall, the worth the low price, but a bit difficult to install.
このレビューの画像
カスタマー画像
カスタマー画像
Squatch
5つ星のうち2.0 Not for me, nor comparable to the alternative.
2014年10月28日にアメリカ合衆国でレビュー済み
Amazonで購入
Sadly, these fenders are flimsy, come with poor quality fasteners that crumble easily, and they have mounting brackets that are too large for most any front fork with recessed mounting holes. I do not recommend them unless you know in advance that they will fit your frame and are willing to replace the fasteners prior to install.
I went with the SKS Longboard fenders after returning these and-despite the tedious installation of those-I am quite happy with them. After the labor-intensive install on the SKS model, I haven't had to make a single adjustment and they've performed flawlessly in the very wet pacific northwest fall weather.
Michael G. Binder
5つ星のうち1.0 Don't fit the Trek 7300 FX
2013年11月6日にアメリカ合衆国でレビュー済み
Amazonで購入
These are advertised to fit most hybrid bikes, but I could not get them to fit my Trek 7300 FX, which is definitely one of the more common hybrid bikes out there. After fiddling around for 2 hours I finally got the rear fender to fit, at which point I thought the job was almost done since the front fender should be much easier. Unfortunately it turned out it was the front fender that was unfittable. First, the holes that are on the fork of my bike where you're supposed to fit the fender stays are large and not threaded, so you need large screws with nuts to attach the fender, but it came with small screws without nuts. So I'd have needed extra hardware to attach the fender. Second, the stays that attach the fender to the fork are waaay too long, I'd have had to shorten them with a hacksaw, which I don't have. Third, the screw that's supposed to attach the fender to the brake stay at the top of the fork was way too long and didn't fit.
So it may have been possible to get the fender to fit by using extra hardware (matching screws) and extra tools (a hacksaw to shorten the stays), but I don't have either, nor do I feel that I should have to go through such lengths to get a fender to fit my bike which is advertised to fit without problems. So I decided to return them and try a different model. These were just a huge waste of time and effort.