Hatena::ブログ(Diary)

日々のメモ

Daichi Laboratory / Synth1 / プロフィール
 

2012-10-28

[]近況

無事に前職を退職し、なんとか生きています。

KennethKenneth 2012/12/31 02:09 Hello Mr. Daichi!
Thank you for the wonderful synthesizer synth1. I use it together with Windows Cubase 6.5 and it works great. Now to the problem: With the new release of Cubase 7, Steinberg has decided to skip support for vst 2.0. Are You therefore planing to update the windows version of synth1 from vst 2.0 to VST 3.5?

Kenneth

daichidaichi 2013/01/12 09:31 どうやら、cubase7ではvst2.4以降しかサポートしないようですね。synth1はvst2.0なので、こりゃ動かんかもしれん。どなたか情報お持ちではないでしょうか?

daichidaichi 2013/01/14 19:50 ある方に情報いただきました。すでにcubase6.0からvst2.4以降にしか正式にはサポートしていないとの事。ですが、現状でsynth1は動作しているとの事でしたので、ひとまずこのまま様子見です。

KennethKenneth 2013/01/19 06:57 I Update my cubase 6.5 to 7 in the next months. I let You know then if synth1 works as it should under Cubase 7.

tanyaotanyao 2013/02/06 19:21 通りすがりで失礼します。
cubase7(x64)での動作ですが当方の環境ではノブをいじるとGUIが消える現象が発生しているものの動作自体は正常ですよー

JoakimJoakim 2013/03/03 19:51 Hi! An iOS release for Synth1 is absolutely great news, have used it for many years now and it is still my favourite VST. My favourite iOS music app is Tabletop, by http://www.retronyms.com/, I think Synth1 would be a perfect match for it! I've got in touch with them about it and they're open to the possibility. Thank you very much!

KennethKenneth 2013/03/10 00:11 Update! I have tested the synth1 on Cubase 7 and it works great. Thanks!

Sergey MoraruSergey Moraru 2013/07/09 23:36 Mr. Ichiro-san! I'm delighted with the news about Synth1 for iOS!!! HOW IS THE PROGRESS GOING? Do you have a specific time frame for the beta version? Will be extremely happy to have some info from you! Thank you!

YusukeYusuke 2013/09/19 03:43 AU版楽しみにしてます!

takakura masarutakakura masaru 2013/12/03 21:46 >>>tanyao
現在Cubase7、windows8で同じ現象を確認し、
関係ありそうなOpt→window sliderで解消されました。
スライダー出すとUIが消える、の解決ではありませんが、
パラメータいじるとUIが消えるの対策にはなると思います。

AlperAlper 2014/07/16 19:43 Hello Daichi!
Please update GUI a little bit.I always use Synth1, a very powerful synth.But Synth1 need a little make up :)

Regards

Alper

jpjp 2015/05/16 10:52 Nice work ! Really in love with Synth1... But there's just a problem with AU validation :

validating Audio Unit Synth1 by Daichi:

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
AU Validation Tool
Version: 1.6.1a1
Copyright 2003-2011, Apple, Inc. All Rights Reserved.

Specify -h (-help) for command options
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

--------------------------------------------------
VALIDATING AUDIO UNIT: 'aumu' - 'Syn1' - 'daiC'
--------------------------------------------------
2015-05-16 03:47:18.261 auvaltool[838:f07] Curve2CM.component -- file://localhost/Library/Audio/Plug-Ins/Components/: trouble parsing Info.plist's AudioComponents; entry: <CFBasicHash 0x78699070 [0xac27d8f0]>{type = mutable dict, count = 7,
entries =>
0 : <CFString 0xac26d524 [0xac27d8f0]>{contents = "description"} = <CFString 0x7869af10 [0xac27d8f0]>{contents = "Curve2CM"}
1 : <CFString 0x7869b070 [0xac27d8f0]>{contents = "subtype"} = <CFString 0x7869a570 [0xac27d8f0]>{contents = "CCM2"}
2 : <CFString 0x7869b0b0 [0xac27d8f0]>{contents = "manufacturer"} = <CFString 0x7869ade0 [0xac27d8f0]>{contents = "Cabl"}
3 : <CFString 0xac271724 [0xac27d8f0]>{contents = "type"} = <CFString 0x7869b220 [0xac27d8f0]>{contents = "kAudioUnitType_MusicDevice"}
4 : <CFString 0xac26efb4 [0xac27d8f0]>{contents = "name"} = <CFString 0x7869b130 [0xac27d8f0]>{contents = "Cableguys: Curve2CM"}
9 : <CFString 0xac26f7e4 [0xac27d8f0]>{contents = "version"} = <CFNumber 0x7869b6b0 [0xac27d8f0]>{value = +132355, type = kCFNumberSInt64Type}
12 : <CFString 0x7869b010 [0xac27d8
2015-05-16 03:47:18.338 auvaltool[838:f07] PanCake2.component -- file://localhost/Library/Audio/Plug-Ins/Components/: trouble parsing Info.plist's AudioComponents; entry: <CFBasicHash 0x78699030 [0xac27d8f0]>{type = mutable dict, count = 7,
entries =>
0 : <CFString 0xac26d524 [0xac27d8f0]>{contents = "description"} = <CFString 0x7869bb80 [0xac27d8f0]>{contents = "PanCake2"}
1 : <CFString 0x7869ba90 [0xac27d8f0]>{contents = "subtype"} = <CFString 0x78699060 [0xac27d8f0]>{contents = "CGP1"}
2 : <CFString 0x7869bad0 [0xac27d8f0]>{contents = "manufacturer"} = <CFString 0x78699d40 [0xac27d8f0]>{contents = "Cabl"}
3 : <CFString 0xac271724 [0xac27d8f0]>{contents = "type"} = <CFString 0x7869c8a0 [0xac27d8f0]>{contents = "kAudioUnitType_Effect"}
4 : <CFString 0xac26efb4 [0xac27d8f0]>{contents = "name"} = <CFString 0x7869bb50 [0xac27d8f0]>{contents = "Cableguys: PanCake2"}
9 : <CFString 0xac26f7e4 [0xac27d8f0]>{contents = "version"} = <CFNumber 0x7869d160 [0xac27d8f0]>{value = +131586, type = kCFNumberSInt64Type}
12 : <CFString 0x7869bc40 [0xac27d8f0]>{
2015-05-16 03:47:18.453 auvaltool[838:f07] WaveShaperCM.component -- file://localhost/Library/Audio/Plug-Ins/Components/: trouble parsing Info.plist's AudioComponents; entry: <CFBasicHash 0x786a3730 [0xac27d8f0]>{type = mutable dict, count = 7,
entries =>
0 : <CFString 0xac26d524 [0xac27d8f0]>{contents = "description"} = <CFString 0x786a3900 [0xac27d8f0]>{contents = "WaveShaperCM"}
1 : <CFString 0x786a3a30 [0xac27d8f0]>{contents = "subtype"} = <CFString 0x786a3bc0 [0xac27d8f0]>{contents = "CWC1"}
2 : <CFString 0x786a3a80 [0xac27d8f0]>{contents = "manufacturer"} = <CFString 0x786a11f0 [0xac27d8f0]>{contents = "Cabl"}
3 : <CFString 0xac271724 [0xac27d8f0]>{contents = "type"} = <CFString 0x786a47b0 [0xac27d8f0]>{contents = "kAudioUnitType_Effect"}
4 : <CFString 0xac26efb4 [0xac27d8f0]>{contents = "name"} = <CFString 0x786a3b00 [0xac27d8f0]>{contents = "Cableguys: WaveShaperCM"}
9 : <CFString 0xac26f7e4 [0xac27d8f0]>{contents = "version"} = <CFNumber 0x786a4820 [0xac27d8f0]>{value = +66304, type = kCFNumberSInt64Type}
12 : <CFString 0x786a3980 [0x
Manufacturer String: Daichi Laboratory
AudioUnit Name: Synth1
Component Version: 1.0.0 (0x10000)

* * PASS
--------------------------------------------------
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 199.410 ms
WARM:
Time to open AudioUnit: 1.318 ms
FIRST TIME:
Time for initialization: 0.011 ms

* * PASS
--------------------------------------------------
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:0

Output Scope Bus Configuration:
Default Bus Count:1
Default Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved

* * PASS
--------------------------------------------------
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
PASS

* * PASS
--------------------------------------------------
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS

* * PASS
--------------------------------------------------
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Host Callbacks
PASS

* * PASS
--------------------------------------------------
VERIFYING SPECIAL PROPERTIES:

VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw syn1 daic - ERROR: View Component specified, but can't be found

Cocoa Views Available: 1
Synth1CocoaViewFactory
PASS

* * FAIL
--------------------------------------------------
AU VALIDATION FAILED: CORRECT THE ERRORS ABOVE.
--------------------------------------------------


validation result: validation échouée

updating properties of AU Synth1 by Daichi...done.

ffxffx 2016/02/28 07:31 Hi,

Synth1 64bit V1.13 beta 8 sadly is completely fucked up on OSX. The LP12/BP12/HP12 filter do not work at all, only in 32 bit. Can you please fix it? For now, I recommend the users to strip off the 64 bit binary of the universal executable. Go to terminal:

sudo -s
cd /Library/Audio/Plug-Ins/VST/Synth1.vst/Contents/MacOS/
cp Synth1 Synth1_orig
lipo -remove x86_64 Synth1_orig -output Synth1

Thank you!

   2016/08/18 02:16 cubaseクソだね。(ー'`ー )

sl23sl23 2016/08/28 01:09 I'll keep this short and to the point.
A few requests to make easier to use and setup.
1. Make Synth1 settings default to the install folder NOT in registry or AppData. I extracted all files and setup on portable drive so it's awkward when using that drive on another PC. ie, Synth1/settings/synth1.ini
2. Make patch organisation easier by naming preset files after their patch names. Instead of 001, 002, 003, etc, name them Symth1 Brastring, Piano, E Piano, etc.
3. Remove .ini settings that require specific paths to Presets folders. Allow Synth1 to dynamically search for folders/presets and show them. This removes the limitation of 099 folders. Still allow the zipped folders though.

Thanks and fantastic VST, couldn't ask for much more it's a legend!!!

cinningbaocinningbao 2016/11/10 03:50 Hi Mr Daichi,
I have been using Synth1 for looooong time! I love it!
but the latest OSX releases are not usable :(

ffx above reported the LP12/BP12/HP12 problem earlier this year and I would like to add to the list of, unfortunate, problems.

- I am unable to select any of the parameters held in boxes only; LFO shapes, effect/delay/chorus types, wheel/midi source and targets - the selection boxes appear but clicking on them does not change anything.

- If I want to load a patch, the floating soundbank window can't be closed.

- There is a strange GUI bug which looks like this:
click a knob on Synth1, the value slider appears and my mouse position is shifted to the right and away from the knob I touched, if I move the mouse even one pixel while I still have the left mouse button down the value is forced to its maximum.

I hope this is enough detail for you to repair Synth1 back its former glory!

thank you for your work over the years.
Kind regards,
cinningbao

MAXMAX 2017/04/30 17:52 >cubaseクソだね。(ー'`ー )

全く同感!ウンコですわw

2011-11-16

[]退職

本日上司に提出した。後は、着々と引継ぎと、残作業をこなすのみとなる。

artemiskitta@gmail.comartemiskitta@gmail.com 2015/11/24 17:41 Hello Synth1 team !
I just bought a new computer ... macintosh version 10.10 and infortunately it's seems that synth1 only support 10.9 and it's a real issue for me ...
Do you plan tu upgrade ? If one day you do it can you let me know ...
thanks a lot for your attention, best regards, ArtemisKiTta

artemiskitta@gmail.comartemiskitta@gmail.com 2015/11/24 17:41 Hello Synth1 team !
I just bought a new computer ... macintosh version 10.10 and infortunately it's seems that synth1 only support 10.9 and it's a real issue for me ...
Do you plan tu upgrade ? If one day you do it can you let me know ...
thanks a lot for your attention, best regards, ArtemisKiTta

artemiskitta@gmail.comartemiskitta@gmail.com 2015/11/24 17:41 Hello Synth1 team !
I just bought a new computer ... macintosh version 10.10 and infortunately it's seems that synth1 only support 10.9 and it's a real issue for me ...
Do you plan tu upgrade ? If one day you do it can you let me know ...
thanks a lot for your attention, best regards, ArtemisKiTta

2011-10-30

[]新たなステップへ

自分の人生が新しい段階へ突入しようとしている。冒険するには年を取りすぎたかもしれないけど、楽しくなければ生きてる意味ないしね。チャレンジあるのみ。

2011-10-15

[]10年ぶりに学生時代の知り合いと会ってきた

先週末の話です。5人で大学前で待ち合わせしてから、構内を散策。近代的な建物がいくつも建っていて驚いた。食堂はかっこよくなってるし、いたるところに人工芝が敷設されてるし、でかいグランドがいくつか出来てるし、滝のように水が流れるしゃれたモニュメント?はあるし、アーチェリー場はあるし。。。どんだけ金もってるねん?って感じ。これは高校生が見学にきたら、心引かれるだろうなあと思いました。

しかし、我が工学部の建物は相変わらずボロでしたw

サークルの仲間5人だったのだけど、その足でサークルの部室(ボックスと呼んでいた)として借りていたゲーセン2Fの家賃2.5万の部屋も覗いてきた。するとなんと我々のサークル名がまだ扉のガラス部分に書かれたまんまでした。。。20年たってんだけどなw

あれから誰も入居しておらず、完全放置のようでした。

いくらなんでも10年後は残っていないだろうけど。。。

2011-09-04

[]台風だと。。。

いつもよりギターアンプの音でかくできるよねw

2011-08-29

[]眠すぎる

なんなのこの眠さ。。。

2011-08-23

[]体調よくなーい

最近夜が涼しくなったけど、気温の変化に弱いんだよなぁ。。。

satoshiisatoshii 2011/08/24 05:11 2:30に続き、またこんな時間に起きました。
うまく行きそうだったのにダメでした。
さすがに会社は行くと思うけど。
株は僕の言ったとおりにすれば、儲かってたのにー。
まあでもこういうのに「たられば」は無いですよね。

satoshiisatoshii 2011/08/24 07:29 > さすがに会社は行くと思うけど。
やっぱ無理...

todaichitodaichi 2011/08/24 20:53 明日はがんばろー!

2011-08-21

[]偏頭痛

頭遺体。。。誰か特効薬作ってください。

2011-08-19

[]仕事が。。。

来週からちょっと忙しくなりそう。ところで8月も後半に入って暑さが和らいだ印象。まだ暑いけどこのくらいの季節がずっと続けばいいなぁ。青い空、白い雲、燦燦と照りつける太陽、あ〜、いいよな〜(意味不明w)。夏のほうが冬よりも体調はいい感じだし。

satoshiisatoshii 2011/08/20 14:51 「仕事が。。。」のタグが
workではなくlifeなのが何か面白かったです。

todaichitodaichi 2011/08/20 17:35 workタグってなんか抵抗あるですよ。仕事はlifeの一部と位置づけた方がなんとなく気が楽だしね。

satoshiisatoshii 2011/08/20 18:25 なるほどねー。
確かにそうかもしれませんね。

2011-08-15 休日ダイヤ

[]朝の電車

今日は盆で空いてるし余裕で座れるだろうと思っていたら、休日ダイヤで車両数が少ないわ、乗り換え必要だわで半分しか座れんかった。

あれ、毎年そのはずなんだよなぁ。。。

[]タナ製作

玄関に散らばってるモノを整理する為の棚を製作開始。いや製作って言うほど大げさなモノじゃありませんが。。。

今日は側板の接着を行ってひとまず終了。